VLAN Commands 517
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enters the VLAN database mode.
console(config)#vlan database
console(config-vlan)#
vlan makestatic
This command changes a dynamically created VLAN (one that is created by GVRP registration)
to a static VLAN (one that is permanently configured and defined). The ID is a valid VLAN
identification number. VLAN range is 2-4093.
Syntax
vlan makestatic
vlan-id
•
vlan-id
— Valid vlan ID. Range is 2-4093.
Default Configuration
This command has no default configuration.
Command Mode
VLAN Database Mode
User Guidelines
The dynamic VLAN (created via GRVP) should exist prior to executing this command. See the
Type column in output from the show vlan command to determine that the VLAN is dynamic.
Example
The following changes vlan 3 to a static VLAN.
console(config-vlan)#vlan makestatic 3
To Next Page
Loading...
