Password Management Commands 967
64
Password Management Commands
This chapter explains the following commands:
• passwords aging
• passwords history
• passwords lock-out
• passwords min-length
• show passwords configuration
passwords aging
Use the passwords aging command in Global Configuration mode to implement expiration date
on the passwords. The user is required to change the passwords when they expire.
Use the no form of this command to disable the aging function.
Syntax
passwords aging
age
no passwords aging
•
age
— Time for the expiration of the password. (Range: 1-365 days)
Default Configuration
Password aging is disabled.
Command Mode
Global Configuration mode
User Guidelines
The passwords aging feature functions only if the switch clock is synchronized to an SNTP
server. See “Clock Commands” on page 911 for additional information.
Example
The following example sets the password age limit to 100 days.
console(config)#passwords aging 100
To Next Page
Loading...
