Dell PowerConnect 8024 - IP Addressing Commands; Clear Host

IP Addressing Commands 295
17
IP Addressing Commands
This chapter explains the following commands:
•clear host
• ip address
• ip address vlan
•ip default-gateway
• ip domain-lookup
•ip domain-name
•ip host
•ip name-server
• ipv6 address
•ipv6 enable
•ipv6 gateway
•show arp switch
• show hosts
• show ip helper-address
• show ip interface management
clear host
Use the clear host command in Privileged EXEC mode to delete entries from the host name-to-
address cache.
Syntax
clear host { name |*}
• name — Host name to be deleted from the host name-to-address cache. (Range: 1-255
characters)
•
* — Deletes all entries in the host name-to-address cache.
Default Configuration
This command has no default configuration.