900 Captive Portal Commands
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#no user 1
show captive-portal user
Use the show captive-portal user command to display all configured users or a specific user in
the captive portal local user database.
Syntax
show captive-portal user [ user-id ]
•
user-id
—User ID (Range: 1–128).
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal user
Session
User ID User Name Timeout Group ID Group Name
------- --------------------- ------- ------------ ------------
1 user123 14400 1 Default
2 user234 0 1 Default
2 group2
To Next Page
Loading...
