Dell PowerConnect 8024 - Show Ipv6 Pimdm

IPv6 Routing Commands 693
Neighbor Last
IPv6 Address MAC Address isRtr State Updated
Interface
-------------------- ----------------- ----- ------- ---------
show ipv6 pimdm
The show ipv6 pimdm command is used to display PIM-DM Global Configuration parameters
and PIM DM interface status.
Syntax
show ipv6 pimdm
Command Mode
Privileged EXEC mode.
Default Configuration
There is no default configuration for this command.
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pimdm
Admin Mode..................................... Enable
PIM-DM INTERFACE STATUS
Interface Interface Mode Protocol State
--------- -------------- ----------------
vlan 10 Enable Non-Operational
vlan 20 Enable Non-Operational