RADIUS Commands 437
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies an authentication and encryption key of “
lion-king
”.
console(config)#radius-server host acct 3.2.3.2
console(Config-acct-radius)#key keyacct
msgauth
Use the msgauth command to enable the message authenticator attribute to be used for the
RADIUS Authenticating server being configured. Use the “no” form of this command to disable
the message authenticator attribute.
Syntax
msgauth
no msgauth
Default Configuration
The message authenticator attribute is enabled by default.
Command Mode
RADIUS mode
User Guidelines
There are no user guidelines for this command.
Example
console(Config-auth-radius)#msgauth
To Next Page
Loading...
