Dell PowerConnect 8024 - Show Ip Igmp Interface

IGMP Commands 595
Example
The following example displays the registered multicast groups for VLAN 1.
console#show ip igmp groups interface vlan 3 detail
REGISTERED MULTICAST GROUP DETAILS
Version1 Version2 Group
Multicast Last Up Expiry Host Host Compat
IP Address Reporter Time Time Timer Timer Mode
--------------- ------------ ---------- --------- ------- -------- ------
225.0.0.5 1.1.1.5 00:00:05 00:04:15 ------ 00:04:15 v2
show ip igmp interface
Use the show ip igmp interface command in Privileged EXEC mode to display the IGMP
information for the specified interface.
Syntax
show ip igmp interface vlan vlan-id
• vlan-id — Valid VLAN ID
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays IGMP information for VLAN 11.
console#show ip igmp vlan 11
Interface...................................... 11
IGMP Admin Mode................................ Enable
Interface Mode................................. Enable
IGMP Version................................... 3