Dell PowerConnect 8024 - Clear Power Average

1070 System Management Commands
Default Configuration
The banner acknowledge is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config)# banner motd “IMPORTANT: There is a power shutdown
at 23:00hrs today, duration 1 hr 30 minutes.”
console(config)# banner motd acknowledge
When the MOTD banner is executed, the user will see the following.
IMPORTANT: There is a power shutdown at 23:00hrs today, duration 1
hr 30 minutes.
Press ‘y’ to continue.
User enters ‘y’.
console >
If the user selects ‘n’ the session will be disconnected, unless it is a serial connection.
clear power average
Use the clear power average command in Privileged EXEC mode to reset the average power
consumption calculation.
Syntax
clear power average
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
This command has no user guidelines.