Dell PowerConnect 8024 - Backend Authentication State; Authentication Success; Authentication Fails; Show Dot1 X Clients

802.1X Commands 539
show dot1x clients
Use the show dot1x clients command in Privileged EXEC mode to display detailed information
about the users who have successfully authenticated on the system or on a specified port.
Syntax
show dot1x clients {all |ethernet interface }
• all — All 802.1X clients authenticated on the system
•
interface — A valid Ethernet interface.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the 802.1X clients authenticated on port
1/g9.
console#show dot1x clients ethernet 1/g9
Interface...................................... 1/g9
Backend Authentication State Current state of the backend authentication state machine. Possible
values are Request, Response, Success, Fail, Timeout, Idle, and
Initialize.
Authentication success Counts the number of times the state machine has received a Success
message from the Authentication Server.
Authentication fails Counts the number of times the state machine has received a Failure
message from the Authentication Server.
Supplicant MAC Address The MAC-address of the supplicant
Filter-ID The Filter Id assigned to the client by the RADIUS server. This field is
not applicable when the Filter-Id feature is disabled on the RADIUS
server and client.
Field Description