Dell PowerConnect 8024 - Area Nssa

OSPFv3 Commands 785
Syntax
area areaid default-cost cost
no area areaid default-cost
• areaid — Valid area identifier.
•
cost — Default cost. (Range: 1-16777215)
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures the monetary default cost at 100 for stub area 1.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 default-cost 100
area nssa
Use the area nssa command in Router OSPFv3 Configuration mode to configure the specified
areaid to function as an NSSA.
Syntax
area areaid nssa
no area
areaid nssa
• areaid — Valid OSPFv3 area identifier.
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.