Dell PowerConnect 8024 - Show Policy-Map Interface

428 QoS Commands
Example
The following example displays the DiffServ information.
console#show policy-map
Policy Name Policy Type Class Members
----------- ----------- -------------
POLY1 xxx DellClass
DELL xxx DellClass
show policy-map interface
Use the show policy-map interface command in Privileged EXEC mode to display policy-
oriented statistics information for the specified interface.
Syntax
show policy-map interface unit/port {in|out}
• unit/port — Specifies a valid port number.
•
in — Inbound direction.
•
out — Outbound direction.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the statistics information for port 1/g1.
console#show policy-map interface 1/g1 in
Interface...................................... 1/g1
Operational Status............................. Down
Policy Name.................................... DELL