Dell PowerConnect 8024 - Show Ip Route Preferences; Show Ip Route Summary

IP Routing Commands 627
N1 - OSPF NSSA External Type 1, N2 - OSPF NSSA external type 2
show ip route preferences
Use the show ip route preferences command in Privileged EXEC mode displays detailed
information about the route preferences. Route preferences are used in determining the best
route. Lower router preference values are preferred over higher router preference values.
Syntax
show ip route preferences
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays IP route preferences.
console#show ip route preferences
Local.......................................... 0
Static......................................... 1
OSPF Intra-area routes......................... 110
OSPF Inter-area routes......................... 110
OSPF External routes........................... 110
RIP............................................ 120
show ip route summary
Use the show ip route summary command in Privileged EXEC mode to display the routing
table summary.