998 Serviceability Tracing Packet Commands
Syntax
debug ip pimdm packet [ receive | transmit ]
no debug ip pimdm packet [ receive | transmit ]
Default Configuration
Display of PIMDM traces is disabled by default.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no usage guidelines for this command.
Example
console#debug ip pimdm packet
debug ip pimsm
Use the debug ip pimsm command to trace PIMSM packet reception and transmission. The
receive option traces only received PIMSM packets and the transmit option traces only
transmitted PIMSM packets. When neither keyword is used in the command, then all PIMSM
packet traces are dumped. Vital information such as source address, destination address, control
packet type, packet length, and the interface on which the packet is received or transmitted is
displayed on the console. Use the “no” form of this command to disable PIMSM tracing.
Syntax
debug ip pimsm packet [ receive | transmit ]
no debug ip pimsm packet [ receive | transmit ]
Default Configuration
Display of PIMSM traces is disabled by default.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no usage guidelines for this command.
To Next Page
Loading...
