Dell PowerConnect 8024 - Show Startup-Config

940 Configuration and Image File Commands
exit
show startup-config
Use the show startup-config command in Privileged EXEC mode to display the startup
configuration file contents.
Syntax
show startup-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the contents of the startup-config file.
console#show startup-config
1 : !Current Configuration:
2 : !System Description “PowerConnect 8024, 3.1.0.x, VxWorks6.5”
3 : !System Software Version 3.1.0.x
4 : !
5 : configure
6 : vlan database
7 : vlan 3,1000-1001
8 : exit
9 : stack
10 : member 1 1
11 : exit
12 : ip address dhcp