Dell PowerConnect 8024 - Match Srcl4 Port; Match Vlan

410 QoS Commands
match srcl4port
Use the match srcl4port command in Class-Map Configuration mode to add to the specified
class definition a match condition based on the source layer 4 port of a packet using a single
keyword or a numeric notation.
Syntax
match srcl4port { portkey | port-number }
• portkey — Specifies one of the supported port name keywords. A match condition is specified
by one layer 4 port number. The currently supported values are: domain, echo, ftp, ftpdata,
http, smtp,snmp, telnet, tftp, and www.
•
port-number — Specifies a layer 4 port number (Range: 0–65535).
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to add a match condition using the “snmp” port name
keyword.
console(config-classmap)#match srcl4port snmp
match vlan
Use the match vlan command in Class-Map Configuration mode to add to the specified class
definition a match condition based on the value of the layer 2 VLAN Identifier field. This field
is the only tag in a single tagged packet or the first or outer tag of a double VLAN packet.
Syntax
match vlan < vlan-id >
• vlan-id — Specifies a VLAN ID as an integer. (Range: 0–4095)
Default Configuration
This command has no default configuration.