802.1X Commands 547
show dot1x advanced
Use the show dot1x advanced command in Privileged EXEC mode to display 802.1X advanced
features for the switch or for the specified interface. The output of this command has been
updated in release 2.1 to remove the Multiple Hosts column and add an Unauthenticated
VLAN column, which indicates whether an unauthenticated VLAN is configured on a port. The
command has also been updated to show the Guest VLAN ID (instead of the status) since it is
now configurable per port.
Syntax
show dot1x advanced [ethernet
interface
]
•
interface
— Specifies a valid ethernet interface.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays 802.1X advanced features for the switch.
console#show dot1x advanced
Port Guest Unauthenticated
VLAN Vlan
--------- --------- ---------------
1/g1 Disabled Disabled
1/g2 10 20
1/g3 Disabled Disabled
1/g4 Disabled Disabled
1/g5 Disabled Disabled
1/g6 Disabled Disabled
To Next Page
Loading...
