Dell PowerConnect 8024 - Delete Backup-Image; Delete Startup-Config

930 Configuration and Image File Commands
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example deletes the backup-config file.
console#delete backup-config
Delete backup-config (Y/N)?y
delete backup-image
Use the delete backup-image command in Privileged EXEC mode to delete a file from a flash
memory device.
Syntax
delete backup-image
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Note that the active image cannot be deleted.
Example
The following example deletes test file in Flash memory.
console#delete backup-image
Delete: image2 (y/n)?
delete startup-config
Use the delete startup-config command in Privileged EXEC mode to delete the startup-config
file.