System Management Commands 1087
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC or User EXEC
User Guidelines
No specific guidelines.
Example
console>show stack-standby
standby unit: 3
show supported switchtype
Use the show supported switchtype command in User EXEC mode to display information
about all supported switch types.
Syntax
show supported switchtype [
switchindex
]
•
switchindex
— Specifies the index into the database of the supported switch types, indicating
the type of the switch being preconfigured. The switch index is a 32-bit integer. (Range:
0–65535)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the information for supported switch types.
console>show supported switchtype
Mgmt Code
To Next Page
Loading...
