Ethernet Configuration Commands 243
Admin Local Link ------ ------ ------ ------ ------
Advertisement yes yes yes yes no
show interfaces configuration
Use the show interfaces configuration command in User EXEC mode to display the
configuration for all configured interfaces.
Syntax
show interfaces configuration [ethernet
interface
| port-channel
port-channel-number
]
•
interface
— Valid Ethernet port.
•
port-channel-number
— Valid port-channel index.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no use guidelines.
Example
The following example displays the configuration for all configured interfaces:
console>show interfaces configuration
Port Type Duplex Speed Neg Admin
State
----- ------------------------------ ------ ------- ---- -----
1/g1 Gigabit - Level Full 100 Auto Up
1/g2 Gigabit - Level N/A Unknown Auto Up
1/g3 Gigabit - Level N/A Unknown Auto Up
1/g4 Gigabit - Level N/A Unknown Auto Up
1/g5 Gigabit - Level N/A Unknown Auto Up
1/g6 Gigabit - Level N/A Unknown Auto Up
1/g7 Gigabit - Level N/A Unknown Auto Up
To Next Page
Loading...
