Dell PowerConnect 8024 Cli Reference Guide

Captive Portal Commands 899
CP Name................................... cp1
Interface Interface Description Type
--------- ----------------------------------- --------
1/g1 Unit: 1 Slot: 0 Port: 1 Gigabit ... Physical
Captive Portal Local User Commands
clear captive-portal users
Use the clear captive-portal users command to delete all captive portal user entries.
Syntax
clear captive-portal users
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#clear captive-portal users
no user
Use the no user command to delete a user from the local user database. If the user has an
existing session, it is disconnected.
Syntax
no user user-id
• user-id —User ID (Range: 1–128).
Default Configuration
There is no default configuration for this command.

Dell PowerConnect 8024 Specifications

General

Switching Capacity	480 Gbps
Stackable	Yes
Device Type	Switch
Enclosure Type	Rack-mountable
Power Redundancy	Optional
Width	17.3 in
Height	1.7 in
Jumbo Frame Support	Yes
Ports	24 x 10 Gigabit SFP+
Management	Web-based GUI, Command Line Interface (CLI), SNMP
VLAN Support	Yes
Power Supply	Internal
Routing Protocol	Static routing
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature	0 to 45 °C
Storage Temperature	-20 to 70 °C
Relative Humidity	10% to 90% (non-condensing)
MAC Address Table Size	32, 000 entries