Dell PowerConnect 8024 - Usage

RADIUS Commands 451
Syntax
timeout timeout
• timeout — Timeout value in seconds for the specified server. (Range: 1-30 seconds.)
Default Configuration
The default value is 15 seconds.
Command Mode
RADIUS mode
User Guidelines
User must enter the mode corresponding to a specific RADIUS server before executing this
command.
Example
The following example specifies the timeout setting for the designated RADIUS Server.
console(config)#radius-server host 192.143.120.123
console(config-radius)#timeout 20
usage
Use the usage command in RADIUS mode to specify the usage type of the server.
Syntax
usage type
• type — Variable can be one of the following values: login , 802.1X or all .
Default Configuration
The default variable setting is all.
Command Mode
RADIUS mode
User Guidelines
User must enter the mode corresponding to a specific RADIUS server before executing this
command.