Dell PowerConnect 8024 - Ip Vrrp Priority

Virtual Router Redundancy Protocol Commands 867
Default Configuration
Enabled is the default configuration.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets the preemption mode value for the virtual router for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip vrrp 5 preempt
ip vrrp priority
Use the ip vrrp priority command in Interface Configuration mode to set the priority value for
the virtual router configured on a specified interface. Use the no form of the command to return
the priority to the default value.
Syntax
ip vrrp vr-id priority priority
no ip vrrp vr-id priority
• vr-id — The virtual router identifier. (Range: 1-255)
•
priority — Priority value for the interface. (Range: 1-254)
Default Configuration
priority has a default value of 100.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets the priority value for the virtual router for VLAN 15.