430 QoS Commands
------ ----- -------------------------------
1/g1 Down DELL
1/g2 Down DELL
1/g3 Down DELL
1/g4 Down DELL
1/g5 Down DELL
1/g6 Down DELL
1/g7 Down DELL
1/g8 Down DELL
1/g9 Down DELL
1/g10 Down DELL
traffic-shape
Use the traffic-shape command in Global Configuration mode and Interface Configuration
mode to specify the maximum transmission bandwidth limit for the interface as a whole. This
process, also known as
rate shaping
, has the effect of smoothing temporary traffic bursts over
time so that the transmitted traffic rate is bounded. To restore the default interface shaping rate
value, use the no form of this command.
Syntax
traffic-shape
bw
kbps
no traffic-shape
•
bw
— Maximum transmission bandwidth value expressed in Kpbs. (Range: 64 - 4294967295)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
Interface Configuration (Ethernet, Port-channel) mode
User Guidelines
This command has no user guidelines.
To Next Page
Loading...
