Dell PowerConnect 8024 - Duration; Ip Http Port

1122 Web Server Commands
Example
The following example generates and displays a certificate request for HTTPS.
console#crypto certificate 1 request
console(config-crypto-cert)#
duration
Use the duration command in Crypto Certificate Generation mode to specify the duration.
Syntax
duration days
• days — Specifies the number of days a certification would be valid. If left unspecified, the
parameter defaults to 365 days. (Range: 30–3650 days)
Default Configuration
This command defaults to 365 days.
Command Mode
Crypto Certificate Generation mode
User Guidelines
This command mode is entered using the crypto certificate generate command.
Example
The following example displays how specify a duration of 50 days that a certification is valid.
console(config-crypto-cert)#duration 50
ip http port
Use the ip http port command in Global Configuration mode to specify the TCP port for use by
a web browser to configure the switch. To use the default TCP port, use the no form of this
command.
Syntax
ip http port port-number
no ip http port
• port-number — Port number for use by the HTTP server. (Range: 1–65535)