220 DHCP Snooping Commands
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC
User Guidelines
There are no user guidelines for this command.
Example
console#show ip dhcp snooping interfaces
Interface Trust State Rate Limit Burst Interval
(pps) (seconds)
---------- ------------- ------------- ---------------
1/g1 No 15 1
1/g2 No 15 1
1/g3 No 15 1
console#show ip dhcp snooping interfaces ethernet 1/g15
Interface Trust State Rate Limit Burst Interval
(pps) (seconds)
---------- ------------- ------------- ---------------
1/g15 Yes 15 1
show ip dhcp snooping statistics
Use the show ip dhcp snooping statistics command to display the DHCP snooping filtration
statistics.
To Next Page
Loading...
