Dell PowerConnect 8024 - Show Ipv6 Dhcp Binding

DHCPv6 Commands 573
Syntax
show ipv6 dhcp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the DHCPv6 server name and status.
console#show ipv6 dhcp
DHCPv6 is disabled
Server DUID:
show ipv6 dhcp binding
Use the show ipv6 dhcp binding command in Privileged EXEC mode to display the configured
DHCP pool.
Syntax
show ipv6 dhcp binding [ ipv6-addr ]
• ipv6-addr — Valid IPv6 address.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.