Dell PowerConnect 8024 - Clear Spanning-Tree Detected-Protocols; Exit (Mst)

454 Spanning Tree Commands
• spanning-tree portfast default
• spanning-tree port-priority
• spanning-tree priority
• spanning-tree tcnguard
• spanning-tree transmit hold-count
clear spanning-tree detected-protocols
Use the clear spanning-tree detected-protocols command in Privileged EXEC mode to restart
the protocol migration process (force the renegotiation with neighboring switches) on all
interfaces or on the specified interface.
Syntax
clear spanning-tree detected-protocols [ethernet interface | port-channel port-channel-
number
]
• interface — A valid Ethernet port. The full syntax is: unit/port.
• port-channel-number — A valid port channel.
Default Configuration
This command has no default setting.
Command Mode
Privileged EXEC mode
User Guidelines
This feature is used only when working in RSTP or MSTP mode.
Example
The following example restarts the protocol migration process (forces the renegotiation with
neighboring switches) on 1/g1.
console#clear spanning-tree detected-protocols ethernet 1/g1
exit (mst)
Use the exit command in MST mode to exit the MST configuration mode and apply all
configuration changes.