Dell PowerConnect 8024 - Area Stub No-Summary

OSPFv3 Commands 791
Syntax
area areaid stub
no area
areaid stub
• areaid — Valid OSPFv3 area identifier.
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example creates a stub area for area 1.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 stub
area stub no-summary
Use the area stub no-summary command in Router OSPFv3 Configuration mode to disable the
import of Summary LSAs for the stub area identified by
areaid.
Syntax
area areaid stub no-summary
no area
areaid stub no-summary
• areaid — Valid OSPFv3 area identifier.
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.