Dell PowerConnect 8024 - Show Ip Pimsm Rphash

PIM-SM Commands 837
Syntax
show ip pimsm neighbor [ interface vlan vlan-id | all ]
• vlan-id — Valid VLAN ID
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays neighbor information for PIM-SM on all interfaces.
console#show ip pimsm neighbor all
NEIGHBOR TABLE
Interface IP Address Up Time Expiry Time
(hh:mm:ss) (hh:mm:ss)
--------- ---------------- ---------- ------------
show ip pimsm rphash
Use the show ip pimsm rphash command in Privileged EXEC mode to display the RP router
being selected from the set of active RP routers. The RP router for the group is selected by using
a hash algorithm.
Syntax
show ip pimsm rphash groupaddr
• groupaddr — Valid group IP address.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.