Dell PowerConnect 8024 - Logging Cli-Command

1056 Syslog Commands
logging cli-command
Use the logging cli-command in Global Configuration mode to enable CLI command logging.
Syntax
logging cli-command
no logging cli-command
Default Configuration
Disabled
Command Mode
Global Configuration
User Guidelines
To see the CLI commands by using the show logging command.
Example #1
console(config)#logging cli-command
<189> JAN 13 05:20:27 192.168.2.1-1 UNKN[248900192]:
cmd_logger_api.c(87) 2113 %% CLI:EIA-
232:----:vlan 3
<189> JAN 13 05:20:27 192.168.2.1-1 UNKN[248900192]:
cmd_logger_api.c(87) 2114 %% CLI:EIA-
232:----:ex
<189> JAN 13 05:20:28 192.168.2.1-1 UNKN[248900192]:
cmd_logger_api.c(87) 2115 %% CLI:EIA-
232:----:
<189> JAN 13 05:20:39 192.168.2.1-1 UNKN[248900192]:
cmd_logger_api.c(87) 2116 %% CLI:EIA-
232:----:show logging file
Example #2
The following example shows temperature status changes.