Dell PowerConnect 8024 - Show Ip Ospf Interface Stats

774 OSPF Commands
show ip ospf interface stats
Use the show ip ospf interface stats command in User EXEC mode to display the statistics for a
specific interface. The information is only displayed if OSPF is enabled.
Syntax
show ip ospf interface stats vlan vlan-id
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays the ospf statistics for VLAN 15.
console>show ip ospf interface stats vlan15
OSPF Area ID........................................... 0.0.0.0
Area Border Router Count....................... 0
AS Border Router Count.......................... 0
Area LSA Count........................................ 1
IP Address..............................................2.2.2.2
OSPF Interface Events.............................. 1
Virtual Events............................................ 0
Neighbor Events..................................... 0
External LSA Count.................................. 0