Dell PowerConnect 8024 - Show Captive-Portal; Show Captive-Portal Status

886 Captive Portal Commands
console(config-CP)#no https port
show captive-portal
Use the show captive-portal command to display the status of the captive portal feature.
Syntax
show captive-portal
Default Configuration
There is no default configuration for this command
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal
Administrative Mode....................... Disabled
Operational Status........................ Disabled
Disable Reason............................ Administrator Disabled
Captive Portal IP Address................. 1.2.3.4
show captive-portal status
Use the show captive-portal status command to report the status of all captive portal instances
in the system.
Syntax
show captive-portal status
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.