Dell PowerConnect 8024 - Boot System

Configuration and Image File Commands 925
60
Configuration and Image File Commands
This chapter explains the following commands:
• boot system
• clear config
•copy
• delete backup-config
• delete backup-image
• delete startup-config
• filedescr
• script apply
•script delete
•script list
•script show
• script validate
• show backup-config
• show bootvar
•show dir
• show running-config
• show startup-config
• update bootcode
boot system
Use the boot system command in Privileged EXEC mode to specify the system image that the
device loads at startup.
Syntax
boot system [image1|image2]
• image1|image2 — Image file.