Dell PowerConnect 8024 - Assign-Queue

388 QoS Commands
• match protocol
• match source-address mac
• match srcip
• match srcip6
• match srcl4port
•match vlan
• mirror
•police-simple
•policy-map
• redirect
•service-policy
•show class-map
• show classofservice dot1p-mapping
• show classofservice ip-dscp-mapping
• show classofservice trust
• show diffserv
• show diffserv service interface ethernet
• show diffserv service interface port-channel
• show diffserv service brief
• show interfaces cos-queue
•show policy-map
• show policy-map interface
•show service-policy
• traffic-shape
assign-queue
Use the assign-queue command in Policy-Class-Map Configuration mode to modify the queue
ID to which the associated traffic stream is assigned.
Syntax
assign-queue < queueid >
• queueid — Specifies a valid queue ID. (Range: integer from 0–6.)