Dell PowerConnect 8024 - Show Captive-Portal Configuration Client Status

896 Captive Portal Commands
Verification Mode......................... Local
CP ID..................................... 1
CP Name................................... cp1
Interface................................. 1/g1
Interface Description..................... Unit: 1 Slot: 0 Port: 1 Gigabit
- Level
User Name................................. user123
Session Time.............................. 0d:00:00:13
show captive-portal configuration client status
Use the show captive-portal configuration client status command to display the clients
authenticated to all captive portal configurations or a to specific configuration.
Syntax
show captive-portal configuration [ cp-id ] client status
• cp-id —Captive Portal ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration client status
CP ID CP Name Client MAC Address Client IP Address Interface
----- --------------- ------------------ ----------------- ---------
1 cp1 0002.BC00.1290 10.254.96.47 1/g1
0002.BC00.1291 10.254.96.48 1/g2
2 cp2 0002.BC00.1292 10.254.96.49 1/g3
3 cp3 0002.BC00.1293 10.254.96.50 1/g4