Dell PowerConnect 8024 - Ipv6 Pimsm (Global Config)

IPv6 Multicast Commands 641
44
IPv6 Multicast Commands
This chapter explains the following commands:
• ipv6 pimsm (Global config)
• ipv6 pimsm (VLAN Interface config)
• ipv6 pimsm bsr-border
• ipv6 pimsm bsr-candidate
• ipv6 pimsm dr-priority
• ipv6 pimsm hello-interval
• ipv6 pimsm join-prune-interval
• ipv6 pimsm register-threshold
• ipv6 pimsm rp-address
• ipv6 pimsm rp-candidate
• ipv6 pimsm spt-threshold
• ipv6 pimsm ssm
•show ipv6 pimsm
• show ipv6 pimsm bsr
• show ipv6 pimsm interface
• show ipv6 pimsm neighbor
• show ipv6 pimsm rphash
• show ipv6 pimsm rp mapping
ipv6 pimsm (Global config)
Use the ipv6 pimsm command to administratively enable of PIMSM for IPv6 multicast routing.
Use the "no" form of this command to disable PIMSM for IPv6.
Syntax
ipv6 pimsm
no ipv6 pimsm