Dell PowerConnect 8024 - Show Sflow Polling

1016 Sflow Commands
User Guidelines
The following fields are displayed:
Example
console# show sflow 2 destination
Receiver Owner Time out Max Datagram Port IP Address
Index String Size
-------- -------- ---------- ------------ ----- ------------------------------
2 0 1400 6343 0.0.0.0
show sflow polling
Use the show sflow polling command to display the sFlow polling instances created on the
switch.
Syntax
show sflow rcvr-index polling [ ethernet interfaces ]
• rcvr-index — The sFlow Receiver associated with the poller (Range: 1–8).
•
interfaces — The list of interfaces to poll.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
Receiver Index The sFlow Receiver associated with the sampler/poller.
Owner String The identity string for receiver, the entity making use of this sFlowRcvrTable entry.
Time Out The time (in seconds) remaining before the receiver is released and stops sending
samples to sFlow receiver.
Max Datagram Size The maximum number of bytes that can be sent in a single sFlow datagram.
Port The destination Layer4 UDP port for sFlow datagrams.