Dell PowerConnect 8024 - Show Ip Pimdm Interface

830 PIM-DM Commands
Syntax
show ip pimdm
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays system-wide information for PIM-DM.
console(config)#show ip pimdm
Admin Mode..................................... Disable
PIM-DM INTERFACE STATUS
Interface Interface Mode Protocol State
--------- --------------- ---------------
show ip pimdm interface
Use the show ip pimdm interface command in Privileged EXEC mode to display interface
information for PIM-DM on the specified interface.
Syntax
show ip pimdm interface vlan vlan-id
• vlan-id — A valid VLAN ID
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.