Dell PowerConnect 8024 - Show Ip Dvmrp Interface; Show Ip Dvmrp Neighbor

582 DVMRP Commands
Total Number of Routes......................... 0
Reachable Routes .............................. 0
DVMRP INTERFACE STATUS
Interface Interface Mode Protocol State
--------- -------------- --------------
show ip dvmrp interface
Use the show ip dvmrp interface command in Privileged EXEC mode to display the interface
information for DVMRP on the specified interface.
Syntax
show ip dvmrp interface vlan vlan-id
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default condition.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays interface information for VLAN 11 DVMRP.
console(config)#show ip dvmrp interface vlan 11
Interface Mode................................. Disable
show ip dvmrp neighbor
Use the show ip dvmrp neighbor command in Privileged EXEC mode to display the neighbor
information for DVMRP.
Syntax
show ip dvmrp neighbor