Dell PowerConnect 8024 - Country

1118 Web Server Commands
• common-name — Specifies the fully qualified URL or IP address of the switch. If left
unspecified, this parameter defaults to the lowest IP address of the switch (when the
certificate is generated). (Range: 1–64)
Default Configuration
This command has no default configuration.
Command Mode
Crypto Certification mode
User Guidelines
This command mode is entered using the crypto certificate request or crypto certificate
generate command.
Example
The following example displays how to specify the name of “router.gm.com.”
console(config-crypto-cert)#common-name router.gm.com
country
Use the country command in Crypto Certificate Generation or Crypto Certificate Request
mode to specify the country.
Syntax
country country
• country — Specifies the country name. (Range: 2 characters)
Default Configuration
This command has no default configuration.
Command Mode
Crypto Certificate Generation or Crypto Certificate Request mode
User Guidelines
This command mode is entered using the crypto certificate request or crypto certificate
generate command.
Example
The following example displays how to specify the country as “us.”