Dell PowerConnect 8024 - Show Ip Mcast Boundary; Show Ip Mcast Interface

718 Multicast Commands
show ip mcast boundary
Use the show ip mcast boundary command in Privileged EXEC mode to display all the
configured administrative scoped multicast boundaries.
Syntax
show ip mcast boundary {vlan vlan-id | all}
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays all the configured administrative scoped multicast boundaries.
console#show ip mcast boundary all
MULTICAST BOUNDARY
Interface Group Ip Mask
-------- ------ ---------------
show ip mcast interface
Use the show ip mcast interface command in Privileged EXEC mode to display the multicast
information for the specified interface.
Syntax
show ip mcast interface {vlan vlan-id | all}
• vlan-id — Valid Ethernet port
Default Configuration
This command has no default configuration.