Dell PowerConnect 8024 - Add Port-Channel; No Add Port-Channel

Link Dependency Commands 345
Command Mode
Link Dependency mode
User Guidelines
No specific guidelines
Example
console(config-depend-1)#add ethernet 1/g1
add port-channel
Use the add port-channel command to add member port-channels to the dependency list.
Syntax
add port-channel port-channel-list
• port-channel-list — List of port-channel interfaces. Separate nonconsecutive ports with a
comma and no spaces. Use a hyphen to designate the range of ports. (Range: Valid port-
channel interface list or range)
Default Configuration
This command has no default configuration.
Command Mode
Link Dependency mode
User Guidelines
No specific guidelines
Example
console(config-linkDep-group-1)#add port-channel 2
no add port-channel
Use the no add port-channel command to remove member port-channels from the dependency
list.
Syntax
no add port-channel port channel list