Dell PowerConnect 8024 - Show Sflow Destination

Sflow Commands 1015
User Guidelines
The following fields are displayed:
Example
console#show sflow agent
sFlow Version.................................. 1.3;Dell Corp.;10.23.18.28
IP Address..................................... 0.0.0.0
show sflow destination
Use the show sflow destination command to display all the configuration information related to
the sFlow receivers.
Syntax
show sflow rcvr-index destination
• rcvr index —The index of the sFlow Receiver to display (Range: 1–8).
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
sFlow Version Uniquely identifies the version and implementation of this MIB. The version
string must have the following structure: MIB Version; Organization; Software
Revision where:
MIB Version: 1.3, the version of this MIB.
Organization: Dell Corp.
Revision: 1.0
IP Address The IP address associated with this agent.