Dell PowerConnect 8024 - Show Management Access-List

964 Management ACL Commands
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the management access-list information.
console# show management access-class
Management access-class is enabled, using access list mlist
show management access-list
Use the show management access-list command in Privileged EXEC mode to display
management access-lists.
Syntax
show management access-list [ name ]
• name — A valid access list name. (Range: 1–32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the active management access-list.
console# show management access-list
mlist
-----
permit priority 1 ethernet 1/g1
permit priority 2 ethernet 2/g1