576 DHCPv6 Commands
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the configured DHCP pool.
console#show ipv6 dhcp pool test
DHCPv6 Pool: test
show ipv6 dhcp statistics
Use the show ipv6 dhcp statistics command in User EXEC mode to display the DHCPv6 server
name and status.
Syntax
show ipv6 dhcp statistics
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the DHCPv6 server name and status.
console> show ipv6 dhcp statistics
DHCPv6 Interface Global Statistics
------------------------------------
DHCPv6 Solicit Packets Received................ 0
To Next Page
Loading...
