RADIUS Commands 447
Timeout........................................ 5
Deadtime....................................... 0
Port........................................... 1812
Source IP...................................... 0.0.0.0
Secret Configured.............................. No
Message Authenticator.......................... Enable
show radius-servers statistics
Use the show radius-servers statistics command to show the statistics for an authentication or
accounting server.
Syntax
show radius-servers statistics [ accounting | authentication ] {
ipaddress
|
hostname
| name
servername
}
•
accounting
|
authentication
— The type of server (accounting or authentication).
•
ipaddress
— The RADIUS server host IP address.
•
hostname
— Host name of the RADIUS server host (Range: 1–158 characters).
•
servername
— The alias used to identify the server.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
The following fields are displayed for accounting servers:
Field Description
RADIUS Accounting
Server Name
Name of the accounting server.
Server Host Address IP address of the host.
Round Trip Time The time interval, in hundredths of a second, between the most recent
Accounting Response and the Accounting Request that matched it from this
RADIUS accounting server.
Requests The number of RADIUS Accounting Request packets sent to this server not
including the retransmissions.
To Next Page
Loading...
