446 RADIUS Commands
Example
console#show radius-servers
IP address Type Port TimeOut Retran. DeadTime Source IP Prio. Usage
------------- ----- ----- ------- ------- -------- ------------- ----- -----
10.27.5.157 Auth 1812 Global Global Global 10.27.65.13 0 all
Global values
Configured Authentication Servers : 1
Configured Accounting Servers : 0
Named Authentication Server Groups : 1
Named Accounting Server Groups : 0
Timeout : 3
Retransmit : 3
Deadtime : 0
Source IP : 0.0.0.0
RADIUS Attribute 4 Mode : Disable
RADIUS Attribute 4 Value : 0.0.0.0
console#show radius-servers accounting name
Server Name Host Address Port Type
-------------------------------- ------------------------ ------ ----------
Default-RADIUS-Server 2.2.2.2 1813 Secondary
console#show radius-servers name Default-RADIUS-Server
RADIUS Server Name............................. Default-RADIUS-Server
Current Server IP Address...................... 1.1.1.1
Retransmits.................................... 4
RADIUS Attribute 4 Mode A Global parameter to indicate whether the NAS-IP-Address attribute
has been enabled to use in RADIUS requests.
RADIUS Attribute 4 Value A Global parameter that specifies the IP address to be used in NAS-IP-
Address attribute to be used in RADIUS requests.
Field Description
To Next Page
Loading...
