Dell PowerConnect 8024 - Show Ip Protocols

624 IP Routing Commands
Netdir Multi
Interface IP Address IP Mask Bcast CastFwd
---------- --------------- --------------- -------- --------
vlan1 192.168.10.10 255.255.255.0 Disable Disable
vlan2 0.0.0.0 0.0.0.0 Enable Disable
loopback2 0.0.0.0 0.0.0.0 Disable Disable
console#show ip interface vlan 15
Primary IP Address.............................
192.168.10.10/255.255.255.0
Secondary IP Address(es).......................
192.168.20.20/255.255.255.0
Routing Mode................................... Disable
Administrative Mode............................ Disable
Forward Net Directed Broadcasts................ Disable
Proxy ARP...................................... Enable
Local Proxy ARP................................ Disable
Active State................................... Inactive
Link Speed Data Rate........................... Inactive
MAC Address.................................... 00:00:00:01:00:02
Encapsulation Type............................. Ethernet
IP MTU......................................... 1500
show ip protocols
Use the show ip protocols command in Privileged EXEC mode to display the parameters and
current state of the active routing protocols.
Syntax
show ip protocols
Default Configuration
This command has no default configuration.