Dell PowerConnect 8024 - Spanning-Tree; Spanning-Tree Auto-Portfast

Spanning Tree Commands 467
BPDU Filter Mode.................. Disabled
BPDU Flooding Mode................ Disabled
Configuration Name................ 00-11-88-2B-40-91
Configuration Revision Level...... 0
Configuration Digest Key..........
0xac36177f50283cd4b83821d8ab26de62
Configuration Format Selector..... 0
No MST instances to display.
spanning-tree
Use the spanning-tree command in Global Configuration mode to enable spanning-tree
functionality. To disable spanning-tree functionality, use the no form of this command.
Syntax
spanning-tree
no spanning-tree
Default Configuration
Spanning-tree is enabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables spanning-tree functionality.
console(config)#spanning-tree
spanning-tree auto-portfast
Use the spanning-tree auto-portfast command to set the port to auto portfast mode. This
enables the port to become a portfast port if it does not see any BPDUs for 3 seconds. Use the
“no” form of this command to disable auto portfast mode.