716 Multicast Commands
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip pimsm ssm default
console(config)#ip pimsm ssm 224.1.0.0 255.255.0.0
show bridge multicast address-table count
Use the show bridge multicast address-table count command to view statistical information
about the entries in the multicast address table.
Syntax
show bridge multicast address-table count
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following command shows information about the entries in the multicast address table.
console#show bridge multicast address-table count
Capacity: 1024
Used: 4
Static addresses: 2
Dynamic addresses: 1
Forbidden addresses: 1
To Next Page
Loading...
